PRODUCT DESCRIPTION
Prefabricated steel structure building is manufactured and constructed using prefabrication. It consists of factory-made components or units that are transported and assembled on-site to form the complete building.
What is steel structure?
A steel structure is a metal structure made of structural steel members that are connected to each other to carry loads and provide complete rigidity. Due to the high strength grade of steel, this structure is reliable and requires less raw material than other types of structures such as concrete structures and wood structures.
In modern buildings, steel structures are used in almost every type of structure, including heavy industrial buildings, multi-storey buildings, equipment support systems, infrastructure, bridges, towers, airport terminals, and more.
What is steel structure's character?
1. High Strength But Light Weight
Steel has high strength and high modulus of elasticity. Compared with concrete and wood, the steel structure has a lighter weight. So it is easier to transport and install. And it is obviously better suitable for large spans, high rise, and heavy loads structure.
2. More toughness, More plasticity, Material Uniform & More reliable structure
Steel material is better to undertake impact and dynamic loads with good seismic performance. Its internal structure is uniform, close to an isotropic homogeneous body. The actual working performance conforms to the calculation theory. Therefore, the reliability of the steel structure is high.
3. High degree Installation Mechanization
Steel structural components are easy to manufacture in factory and assemble on site. The mechanized manufacture has high precision with high production efficiency. And it's fast assembled on site with quick construction time. Steel structure is the most industrialized structure.
4. Good Sealing Performance
The welded structure can be completely sealed. Therefore it support to be made into products with good air tightness and good water tightness, like the high-pressure container, the large oil sump and pressure pipes.
5. Heat-resistant But No fire-resistant
When the temperature is below 150 ºC, the steel properties almost don't change. When the temperature is between 300 ºC and 400 ºC, the steel strength and elastic modulus are significantly reduced. When the temperature is around 600 ºC, the strength of the steel tends to zero. So the steel structure surface should be protected with a heat insulation board. In the buildings required special fire protection, the steel structure must be protected with refractory materials to improve the fire resistance level.
6. Poor Corrosion Resistance
Especially in the environment of moist and corrosive media, it is easy to rust. The general steel structure should be derusted, galvanized or painted, and should be regularly maintained. For offshore platform structures in seawater, special measures such as "zinc block anode protection" are required to prevent corrosion.
7. Low carbon, Energy saving, Green and environmental, Material recycled
The demolition of steel structures hardly generates construction waste, and the steel can be recycled.
PROJECT MATERIAL LIST
Product Parameters
| Main Steel Frame |
Column |
Q235, Q345 Welded H Section Steel |
| |
Beam |
Q235, Q345 Welded H Section Steel |
| Secondary Frame |
Purlin |
Q235 C and Z purlin |
| |
Knee brace |
Q235 Angle Steel |
| |
Tie Rod |
Q235 Circular Steel Pipe |
| |
Brace |
Q235 Round Bar |
| |
Vertical and Horizontal Support |
Q235 Angle Steel, Round Bar or Steel Pipe |
| Maintenance system |
Roof Panel |
Insulated Sandwich Panel (EPS /Glass Fiber /
Rock Wool / Pu) / Steel Sheet |
| |
Wall Panel |
Sandwich Panel / Corrugated Steel Sheet |
| Accessories |
Window |
Aluminium Alloy Window / PVC Window / Sandwich Panel Window |
| |
Door |
Sliding Sandwich Panel Door / Rolling Metal Door / Personal Door |
| |
Rain-spout |
PVC |
| 1. Opinions |
1)We can supply all kinds of steel structures, steel building, metal building, modular house, steel frame for warehouse, workshop, garage etc, steel beams, other riveting and welding parts. |
| 2)We can also make and develop new parts according to customers' drawings and detailed dimensions. |
2. Specifications
|
1)Size: MOQ is 100m2, width X length X eave height, roof slope |
| 2)Type: Single slope, double slope, muti slope; Single span, double-span, Multi-span, single floor, double floors! |
| 3) Base: Cement and steel foundation bolts |
| 4) Column and beam: Material Q345(S355JR)or Q235(S235JR) steel, all bolts connection! Straight cross-section or Variable cross-section! |
| 5) Bracing: X-type or V-type or other type bracing made from angle, round pipe, etc |
| 6) C or z purlin: Size from C120~C320, Z100~Z200 |
| 7) Roof and wall panel: Single colorfull corrugated steel sheet0.326~0.8mm thick, (1150mm wide), or sandwich panel with EPS, ROCK WOOL, PU etc insulation thickness around 50mm~100mm, |
| 8)Accessories: Semi-transparent skylight belts, Ventilators, down pipe, Glavanized gutter, etc |
| 9)Surface: Two lays of Anti-rust Painting! |
| 10) Packing: Main steel frame without packing load in 40' OT, roof and wall panel load in 40' HQ! |
| 3. Design Parameters |
If you need we design for you, pls supply us the following parameter together with detail size: |
| 1)Live load on roof(KN/M2) |
| 2)Wind speed(KM/H) |
| 3)Snow load (KG/M2) |
4)Earthquake load if have
5) Demands for doors and windows |
| 6)Crane (if have), Crane span, crane lift height, max lift capacity, max wheel pressure and min wheel pressure! |
FINISHED PROJECT
Factory Show as belows:
Qingdao TAIWEI steel structure Co. Ltd. is a comprehensive enterprise which integrates design, production, processing, logistics, transportation and construction in the steel structure construction industry. It has 3 factories to produce various types of steel structures and plates. It has completed a great deal of steel structure construction projects in domestic and overseas. And we has won the unanimous praise of a wide range of customers.
Processing Show as belows:
Prepare Raw Materials
Cut steel plate or use international size H section steel and angle steel, round tube, round steel, square tube etc.;
Assembly and Welding
Our welders will follow the drawings to assemble the steel members and weld them together as a entire beam/column/brace and so on;
Our quality inspector will check the steel pieces after finish welding. This process will go through the 1st quality check.
Sand blast
After finish welding and polishing, our sand effect can reach international 2.5 high grade, very good for resist rust. This process will go through 2nd quality check.
Paint
Within 2 hours after sand blast, all the steel members should be painted. Clients can choose any color and any brand of painting. This process will go through 3rd quality check.
Inspect the goods by clients
After we finish a part of fabrication work, we will invite clients to inspect the goods before we pack the steel components. If not available to inspect, we could send video for reference.
Service:
1) We have the professional engineers to design your idea with full solutions. Procurement and manufacture for all materials for prefabriccated building.
2) Professional workshop controls strictly producion quality.
3) Site management & Installation supervision, we could send our engineers to help for the installation supervision, you just need to prepare a team which know normal construction works will be OK.
On-site Installation Show as belows:
){kind=link}